RDRO & SPIRAL RO
RDRO
Round disc Reverse osmosis (RDRO) : The specialized RD RO is used for highly polluted waste water treatment / reuse with high efficiency and can handle high TDS, COD, BOD in the effluent.
The module is vertically mounted with octagonal membrane cushions and round hydraulic disc (ABS). It is an open channel feed flow system and can take higher TSS / SDI. Permeate is taken out from the centre from each individual membrane cushion. The module has top & bottom end flanges with Lip seals. The outer cover comprises of FRP vessel.
Advantages
- Can handle high TDS, COD, BOD, SDI
- Offer Higher Recovery
- Higher Pressure available 60,75, 90, 120 Bar
- Less susceptible to fouling and scaling
- Modules are easy to clean & maintain
- Easy Replacement of Membrane cushions
RDRO Applications
- Effluents in
- Pharma & Chemicals
- Distilleries & Breweries
- Textiles
- Tanneries
- Dyes & Pigments
- Pesticides & Fertilizers
- Automobiles & Paints
- Distilleries & Breweries
- Electroplating
- Starch
- Refineries & Petrochemicals
- Existing RO rejects
- Leachate
- Desalination
- Brackish Water/ Grey Water/ Ground Water
SPIRAL RO
Spiral being an age-old technology has got wide-spread use. It has got lot of failures due to poorly designed pre-treatment, system hydraulics. It has got poor efficiency, high cost and higher energy consumption. So there is a pressing need for a better product with ease of operation, lower energy consumption and with reduced + operational cost. Spiral R.O. membranes & system helps you get a better quality treated raw water for process application as well as for drinking purpose.
Online Continuous Emission Monitoring System (OCEMS):
Online Water Analyzer based on UV absorption, which has found increasingly wide application in process industries The UV source is a Xenon flash lamp specified for 109 flashes that corresponds to more than years of life time with one measurement every minute. Physic-chemical measurements like pH, ORP, dissolved oxygen; conductivity can be added to the internal measurements by using external probes. The dissolved oxygen probe is based on fluorescence method for a lower maintenance and higher stability.